Please remember to switch off all the equipment after you are done. Shutdown the computer properly by selecting Shut down from the Windows menu.
The following password instruction is for BIOSCI systems only. If you are looking for information on changing your UDelNet password, please visit UDel Accounts, Access & Password page.
Your password must be 12-30 characters long, and it must have at least 3 of these:
To proceed with the following link to change your BIOSCI password, you must be on the UDel network. Please connect to VPN first if you are not on the UDel network.
Please contact BISC IT for initial enrollment before using the instructions for Code42 CrashPlan. Follow the strategy below to protect your data. Code42 CrashPlan can help provide you with an offsite copy of your data.
CrashPlan licenses are for use on faculty/staff University-owned machines or faculty/staff machines being used for University business. You can install on up to four devices. Please read the instructions carefully to protect your backup.
This set of instructions are for Code42 CrashPlan that have been preinstalled on BISC computers. Follow these steps if you are notified by BISC IT to set up backup for your account.
There are different ways to restore files as well as different situations to consider. If you are looking to restore a few small files, you can choose to download a zip file from the web console (currently limited to 250MB). If you are restoring a large number of files, Code42 CrashPlan recommends that you choose to Restore from the App. If your original device has crashed and you are recovering to a new device, please see the following Replace your device instructions on Code42’s website. Contact BISC IT for further assistance.
There are two wireless network available in Wolf Hall. Depending on your location in Wolf Hall, you will see the eduroam and/or BISC Wi-Fi signal. Both connections require sign in with your UDel email address and UDel password.
HOWTO get a scantron-based exam uploaded to Canvas with Respondus 4.0 by Dr. David Raden
If you have exams that are written for Scantrons, your exams are probably ready to be uploaded. Here are the 3-steps required to upload questions:
That is it! Your exam is ready to import into Respondus and upload to Canvas.
Add your answers to all of the questions at the end of the file. This is not required to get the exam up, but it is easier to add on your computer than once it is in Canvas. After your last question put “Answers:” then add all the answers (question number and correct letter answer) one per line. (example below)
Once it is in Canvas it will need some cleaning up and you need to add tables and figures. See below for a few things that can Improve the process.
Question Example (none of the indentation/spacing/formatting required)
1. First question
A. Answer A
B. Answers B
C. Answer C
2. Second question
A. Answer A
B. Answer B
1) Unformatted question works fine too
A) Answer A
B) Answer B
C) Answer C
Answer Example (again no formatting required) at the end of the file
Answers:
1. A
2. B
Steps to make it go more smoothly. (in order of most useful)
Please note that you do not need Respondus if you already have a QTI package that you may have obtained from the publisher of the textbook or other sources. Please see this guide – ‘How do I import a quiz from a QTI package?‘.
Download custom installation file and license information from UDeploy Respondus.
System Requirements
Before you start the installation, all other applications must be closed. Do not have Notepad or any text editor open. Run Respondus4Campus.exe to start the installation. The following is a summary of the steps. Informational window screens during the installation are omitted to keep instructions short. Click ‘Next >’ on informational window screens during the installation process.
Included with the installation file is a text file with the license information. Our license also permits you to install a copy of the Respondus software on a home or travel computer. However, you are not permitted to provide the Respondus software or the password information to anyone who is not affiliated with our institution. Such an action is a violation of our licensing agreement with Respondus and is also illegal. The license information must be entered exactly as shown in the license file.
The first time you start Respondus 4.0, you will be presented with the license window. If you accidentally clicked away or closed the license window, go to the menu at the top of the application and select ‘File‘ and ‘Update License‘.
Copy and paste the information in the correct boxes and click ‘License‘.
After entering the license information, you will need to choose the appropriate learning management system (LMS) personality. Choose ‘Canvas‘.
You can create your exams using Respondus 4.0 or import from a Microsoft Word file. When you are ready to publish exams to Canvas, click on the ‘Preview + Publish‘ tab. Please note that the ‘Preview + Publish’ option will only be active after you create or open a saved Respondus exam file or has imported an exam from Microsoft Word or other readable format. Click on ‘Publish‘ in the left pane and click on ‘Publish Wizard‘.
Publish Wizard
Respondus will display an information box asking you to log into Canvas using the browser window. Simply click ‘OK’.
We recommend the following settings below:
Click on ‘Copy the invitation’.
Click on the ‘Copy Meeting Invitation’ button.
Use your preferred method of communication with your students/participants to send the meeting invitation.
This can be done via email or Canvas communication.
When it is time for your meeting, sign back in to Zoom and click on ‘Meetings’ and then ‘Start’. It is important that you sign in again when it is time to start the meeting so you have all the features as host of the meeting.
If Zoom did not start automatically, click ‘download & run Zoom‘. Your browser may save it to a location that is set for the browser so please check the location for the file.
Enter your name. Click ‘Join Meeting‘ and then ‘Join with Video‘.
The test will automatically start. If you have multiple devices with speaker or microphone connected to your computer, please click on the drop down list as shown in the screen captures below to select your preferred camera, speaker and microphone.
Link: https://zoom.us/test
Click View and install the Zoom app if you do not have it on your mobile device. After installing the app, go back to the link above in your web browser and click ‘Join‘
Open this page in “Zoom”? – Click ‘Open‘.
Please enter your name: Enter your name here.
“Zoom” Would Like to Access the Camera – Click ‘OK‘.
Video Preview – Click ‘Join with Video‘.
“Zoom” Would Like to Access the Microphone – Click ‘OK‘.
“Zoom” Would Like to Send you Notifications – Decide if you would like the notifications.
Example screen captures – left to right.
Check that your speaker is ON.
During class you should mute your microphone or your instructor may mute it for you. Be sure to enable the microphone if you need to speak.
